3D printing for reloading

[juststarting]

Heh nah, my kids are a bit more complex than that LOL

Funny enough I don’t actually print shit I don’t need.

[juststarting]

Next, born out of necessity My 24ga to 577 Snider brass cutting jig.

[juststarting]

…and my fucktopuss. Because I can.

[juststarting]

Finally got around to hooking up all spent primer chute stuff I made…

Rock Chucker chute

Dillon chute

Nothing special here, just sip ties to prevent hose popping out of the box

all squared away nicely

all squared away nicely

[juststarting]

Little bit of cross-posting for completeness (improved Dillon 650XL ejector).

Dillon 650XL reloading press - notes

After dislodging ejector spring a couple of times, thanks to @1Fatman for pointing me to an improved design, baked a new one. Seems to work well. I still need to put it through a proper test, but it worked very well with a handful of test cases and dummy rounds. [rps20190610_101418~2] Also reprinted a spent primer chute in better material.

I am still fascinated by the whole, oh, I need a part, I can just make it now.

[1Fatman]

And here I was thinking that you would design and print a fancy Y piece and have both tubes going into it and only putting one hole in the container.

[juststarting]

I did not think of that lol

[1Fatman]

[juststarting]

Too much bother tbh

[Justice]

https://m.yeggi.com/q/9mm+ammo+tray/

Anything good here?

[GUN-DMC]

The snap together loading blocks look good although most people here would load 9mm on a progressive press, but in rifle cals they’d be great.

[juststarting]

For completeness…

Automated Dillon primer tube filler DIY.

DIY (3D printed) Dillon primer tube filler.

A while ago in my mad dash of printing everything I spotted a Dillon primer tube filler on Thingiverse and thought, yes! Anyway, this was one of my first large prints, I printed the printable components and it sat there for a while, until I accumulated enough parts to hook it all up. Mine, lets say, not exactly how the designer intended it to be lol For reference, this what it’s supposed to look like (ignore colours, that’s irrelevant). [original] Of course, this is all build around availab…

[bentaz]

Can you 3d print a useable thread? As in could you print a plastic nut and bolt?

[juststarting]

I am not that awesome to actually design a thread to fit a nut, or both. That was long answer. Short answer, yes.

[TheDude]

Autodesk fusion 360 had built in support for most of the common threads and is really easy to add internal or external threading to an object. It’s free for creators/enthusiasts.

[juststarting]

Yep, that’s what I use.

[Gunmut]

I always wanted someone to make me a few tiny violins…so I could give then to all the people having a whine about things going bad in their lives

[juststarting]

That’s a cool idea!

[juststarting]

Playing around with this last week and today…

A bullet collator.

I built a prototype and which works well, but I wasn’t 100% with the motor I have, so had to reprint the bucket with new supports for a different motor. I have high torque, but I couldn’t slow down the one I had in first built (even with speed controller and lower voltage). Anyhow, have another one I will try and probably order one more to test. Other than that I am pretty happy with it. Bucket is at 75% infill with PLA+. Everything else is at 100%

bullet collator assembly and die adapter that I still need to wire a microswitch. Will post video when I get around to completing it. Hopefully in a week or two or whenever I am out of ammo and need to make more

[juststarting]

As a side note, anyone running Dillon 650 with bearing washer upgrade, this case ejector is freaking awesome.

DIllon 650XL Case Ejector by stah

Works absolutely amazing. A million times better than the spring ejector.